Produse pentru magnet din (1171)

Following standard colours are available ex stock: blue, yellow, green, orange, red, black, white Following standard colours are available short term: brown, grey, light blue, pink, turquoise, violet Alternative to the standard we also offer individual solutions: » Plastic housing in special colours » Printing individually » Plastic housing with metallized surface (for example silver) Article number:OMAG-21 L mm:21 B mm:12.5 H mm:6.5 Force* N:1.5 Magnetization:multipole Magnet:hard ferrite Packaging unit:10 pieces

These systems are used especially on delicate surfaces. Due to the rubber coating occurs neither scratches nor discoloration. Moreover the slip resistance is improved thanks to rubber coating. Alternative to the standard we also offer individual solutions: » Other colours rubber coating » Rubber coating harder or softer » Printable rubber coat Article number:A43x31A-KsM4 L mm:43 B mm:31 H mm:6.9 Thread MxL:M4x4.5 Force* N:105 Shear force* N:45 Weight g:27 Temperature °C:60

These systems are used especially on delicate surfaces. Due to the rubber coating occurs neither scratches nor discoloration. Moreover the slip resistance is improved thanks to rubber coating. Alternative to the standard we also offer individual solutions: » Other colours rubber coating » Rubber coating harder or softer » printable rubber coat Article number:A18C-KwB3.0H6 D mm:18 d1 mm:d2 mm d2 mm:H mm H mm:h mm h mm:Force* N Force* N:25 Shear force* N:Weight g Weight g:5.5 Temperature °C:60

These systems are used especially on delicate surfaces. Due to the rubber coating occurs neither scratches nor discoloration. Moreover the slip resistance is improved thanks to rubber coating. Alternative to the standard we also offer individual solutions: » Other colours rubber coating » Rubber coating harder or softer » printable rubber coat Article number:A12AG-KsM4x8 D mm:12 H mm:L mm L mm:15.5 Thread M:M4x8 Force* N:13 Shear force* N:Weight g Weight g:4.5 Temperature °C:60

The temperature indicated refers to the maximum operating material temperature. However, that value can be reduced according to geometry. Article number:MSASm4x3 Grade:RCS26H D mm:4 +0.1/ -0.1 H mm:3 +0.1/ -0.1 Magnetization:axially Force* N:2.5 Weight g:0.3 Temperature °C:350

Following standard colours are available ex stock: blue, yellow, green, orange, red, black, white Following standard colours are available short term: brown, grey, light blue, pink, turquoise, violet Alternative to the standard we also offer individual solutions: » Plastic housing in special colours » Printing individually » Plastic housing with metallized surface (for example silver) Article number:OMAG-11x L mm:11 B mm:11 H mm:6.5 Force* N:1.5 Weight g:1.5 Magnetization:bipolar Magnet:hard ferrite Packaging unit:20 pieces

The temperature indicated refers to the maximum operating material temperature. However, that value can be reduced according to geometry. Article number:RM100ACBk99mf00 Grade:ANC5 L mm:100 H mm:10 B mm:15 Force* N:17 Surface:red-green Weight g:107 Temperature °C:180

The temperature indicated refers to the maximum operating material temperature. However, that value can be reduced according to geometry. Alternative to the standard we also offer individual solutions: » Magnets are also available in other dimensions » Possible operating temperature up to max. 180°C » Magnets in self-adhesive version Article number:MNAQm7.5x4x1.5 Grade:N35 L mm:7.5 +0.1/ -0.1 B mm:4 +0.1/ -0.1 H mm:1.5 +0.1/ -0.1 Magnetization:axially Weight g:0.4 Temperature °C:80

These systems are used especially on delicate surfaces. Due to the rubber coating occurs neither scratches nor discoloration. Moreover the slip resistance is improved thanks to rubber coating. Alternative to the standard we also offer individual solutions: » Other colours rubber coating » Rubber coating harder or softer » printable rubber coat Article number:A18D-KwM4 D mm:18 Thread M:M4 Force* N:25 Temperature °C:60

The temperature indicated refers to the maximum operating material temperature. However, that value can be reduced according to geometry. Article number:MFARm13x3.5x3.9 Grade:26/22 D mm:13.6 +0.3/ -0.3 d mm:3.5 +0.1/ -0.1 H mm:3.9 +0.1/ -0.1 Magnetization:axially Countersunk:yes Force* N:2.5 Weight g:2.5 Temperature °C:250

The magnetic door stay is intended for fitting/attachment in/to door leaves. When fitted, the magnetic door stay is hidden in the door leaf. A separate installation set (TFS26-MONT) is available. With both installation variants, the door is held at the installation point of the disc when the door leaf with integrated door stay slides over the disc. Product TFS26-HlsKs serves for side mounting of our door stay to the door leaf. Article number:TFS26-KsNd D mm:50 d mm:26 H mm:26 SW mm:34 Force* N:105 Weight g:63 Temperature °C:60

These systems are used especially on delicate surfaces. Due to the rubber coating occurs neither scratches nor discoloration. Moreover the slip resistance is improved thanks to rubber coating. Alternative to the standard we also offer individual solutions: » Other colours rubber coating » Rubber coating harder or softer » printable rubber coat Article number:A12AG-KwM4x8 D mm:12 H mm:L mm L mm:15.5 Thread M:M4x8 Force* N:13 Shear force* N:Weight g Weight g:4.5 Temperature °C:60

These systems are used especially on delicate surfaces. Due to the rubber coating occurs neither scratches nor discoloration. Moreover the slip resistance is improved thanks to rubber coating. Alternative to the standard we also offer individual solutions: » Other colours rubber coating » Rubber coating harder or softer » Printable rubber coat Article number:A43x31A-KwM4 L mm:43 B mm:31 H mm:6.9 Thread MxL:M4x4.5 Force* N:105 Shear force* N:33 Weight g:27 Temperature °C:60

These systems are used especially on delicate surfaces. Due to the rubber coating occurs neither scratches nor discoloration. Moreover the slip resistance is improved thanks to rubber coating. Alternative to the standard we also offer individual solutions: » Other colours rubber coating » Rubber coating harder or softer » printable rubber coat Article number:A43C-KsB7.0H6 D mm:43 d1 mm:7.5 d2 mm:12.8 H mm:Force* N Force* N:100 Shear force* N:30 Weight g:27 Temperature °C:60

Alternative to the standard we also offer individual solutions: » Lacquering also possible in other colours » Equipped with a closed eyelet » Higher holding force Article number:DEMAG-16 D mm:16 Hook:M3 Force* N:18

Alternative to the standard we also offer individual solutions: » Corrosion protection with black galvanised housing surfaces (up to 720 hours in a salt spray test - depending on the magnet material) Article number:F10A-vM3 D mm:10 +0.1/ -0.1 d mm:6 +0.1/ -0.1 H mm:4.5 +0.2/ -0.1 L mm:11.5 +0.3/ -0.2 Thread M:M3 Temperature °C:200

Bar magnet AlNiCo, steel body, with internal thread Article number:S12.5 D mm:12.5 +0.1/ -0.1 H mm:16 +0.2/ -0.2 Thread MxL:M4x6 Force* N:20 Surface:zinc coated Weight g:15 Temperature °C:350

The above mentioned flat pot magnets are manufactured from standard parts according to DIN EN ISO 4017-8.8. Dimensions and tolerances depend on the current status of the standard. Hexagon screws are suitable for being tightened with an open-end spanner. This is a special advantage in comparison to our round flat pot magnets, which only can be screwed on by hand. The hexagon screws are available with different lengths corresponding to fixed standards. By this simplified production method they are quite economical resp. there is a cost benefit compared with the turned special parts. Article number:FG010NdAG06v-00 SW mm:10 h mm:4 +0/ -0.5 Thread MxL:M6x12 Force* N:25 Temperature °C:80

The above mentioned flat pot magnets are manufactured from standard parts according to DIN EN ISO 4026-45H. Dimensions and tolerances depend on the current status of the standard. The threaded pins with hexagon socket have a universal thread and are available with different lengths corresponding to fixed standards. By this simplified production method they are quite economical resp. there is a cost benefit compared with the turned special parts. Moreover, through the universal thread, they benefit from a continuously adjustable magnetic attachment point. Article number:FG006NdAG06v-00 Thread MxL:M6x12 SW mm:Force* N Force* N:2.5 Weight g:Temperature °C Temperature °C:80

Following standard colours are available ex stock » transparent: blue, yellow, green, orange, red, black, nature » completely coloured: blue, yellow, green, orange, red, black, white » high adhesive force at a small diametre » Manufactured without glue » easy to grip, easy to detach Alternative to the standard we also offer individual solutions: » Plastic housing in special colours Article number:OM014NdRd01 D mm:14 H mm:17.7 Packaging unit:5 pieces

Alternative to the standard we also offer individual solutions: » Corrosion protection with black galvanised housing surfaces (up to 720 hours in a salt spray test - depending on the magnet material) Article number:F6-NdAGvM3x7 D mm:6 +0.1/ -0.1 H mm:4.5 +0.1/ -0.1 Thread MxL:M3x7 Weight g:1.3 Temperature °C:80

Bar magnet AlNiCo, steel body - with threaded neck Article number:S6AGvM3x7 D mm:6 +0.1/ -0.1 H mm:20 +0.2/ -0.2 Thread MxL:M3x7 Force* N:Weight g Weight g:4.5 Temperature °C:450

Alternative to the standard we also offer individual solutions: » Corrosion protection with black galvanised housing surfaces (up to 720 hours in a salt spray test - depending on the magnet material) Article number:F10B-v D mm:10 +0.1/ -0.1 H mm:4.5 +0.2/ -0.1 Temperature °C:200

Alternative to the standard we also offer individual solutions: » Corrosion protection with black galvanised housing surfaces (up to 720 hours in a salt spray test - depending on the magnet material) Article number:F50C-v D mm:50 +0.2/ -0.1 H mm:10 +0.5/ -0.2 d1 mm:8.5 +0.2/ -0.2 d2 mm:22 Force* N:180 Weight g:85 Temperature °C:200

Alternative to the standard we also offer individual solutions: » Corrosion protection with black galvanised housing surfaces (up to 720 hours in a salt spray test - depending on the magnet material) Article number:F6-NdBv D mm:6 +0.1/ -0.1 H mm:4.5 +0.1/ -0.1 Temperature °C:80

Use as door stop is possible. It may be used in saunas or infrared cabins. Article number:FSW15-NdAGM6x23 Force* N:50 Weight g:10 Temperature °C:80

Alternative to the standard we also offer individual solutions: » Corrosion protection with black galvanised housing surfaces (up to 720 hours in a salt spray test - depending on the magnet material) Article number:F16-SCCvT D mm:16 +0.1/ -0.1 H mm:4.5 +0.1/ -0.1 d1 mm:3.5 +0.1/ -0.1 d2 mm:6.6 +1/ 0 Force* N:57 Weight g:Temperature °C Temperature °C:280

The systems offer better resistance to chemicals than normal steel galvanised flat pot magnets. The systems offer higher temperature resistance to chemicals than normal steel galvanised flat pot magnets. Article number:F20C-4016 D mm:20 +0.1/ -0.1 H mm:6 +0.2/ -0.1 d1 mm:4.1 +0.4/ 0 d2 mm:9.4 +1/ 0 Force* N:22 Weight g:Temperature °C Temperature °C:220

The systems offer better resistance to chemicals than normal steel galvanised flat pot magnets. The systems offer higher temperature resistance to chemicals than normal steel galvanised flat pot magnets. Article number:F25A-4016M5 D mm:25 +0.1/ -0.1 d mm:8 +0.2/ -0.2 H mm:7 +0.3/ -0.2 L mm:16 +0.5/ -0.3 Thread M:M5 Force* N:32 Weight g:20 Temperature °C:220

Bar magnet AlNiCo, steel body with fitting tolerance h6 Article number:S6P D mm:6 (h6) H mm:10 +0.2/ -0.2 Temperature °C:450